FUEL COMMANDER

Stock Just Arrived..!!!  
For ER-6n, ER-6f and Versys 650 models from '06 - present

  

This listing is for one programmable ECU remapping unit for electronic fuel injected (EFI) motorbikes. (Fits the bike and model specified in the title)

*It will not fit any carb equipped models

The device can activate 15 different ECU maps which include fuel economy and power increase options.(ECU is the electronic unit that controls the fuel system of all fuel injected bikes and stores the fueling maps that are responsible for your bike's performance.)

+  Fully compatible with other fuel management devices, ECU flashers and Timing Retard Eliminators or de-restrictors of other brands like Dynojet, Yoshimura or Nikko.It does not affect or interfere with their functions.

 What is the Nitro X Fuel Commander?

Nitro X is a simple fuel management control system that can help you select the best performance program for your needs and also resolve fueling issues that have been caused by aftermarket exhausts and racing air filters.

You can reset back to normal (factory settings) any time you want.

" IT'S A UNIQUE DEVICE, A MUST HAVE FOR YOUR BIKE TUNING THAT OFFERS YOU THE HORSEPOWER GAIN OF AN EXPENSIVE RACING ECU UNIT OR A FUEL MANAGEMENT DEVICE !"

HOW IT WORKS:

The device can manipulate the ECU by controlling some sensors of the bike and force it to change fueling maps. This way it can activate 15 different fueling maps that can provide for the fuel needs of most common mods like racing exhausts or high flow air filters or even for more uncommon mods like dry nitrous oxide systems for up to 20 HP gain.

Activation of the different maps is achieved by turning on/off the buttons on the control panel of the device.

It is 100% safe!-The device works based on the factory standards of the ECU and it cannot cause any damage to your bike even in the long run.

It does not lean or over fuel the motorcycle in order to gain power. This is a common misconception but it is very unreasonable to believe that as both of the above situations cause loss in power and problematic function of the engine. In order to achieve power gain you need to adjust the fuel properly any exaggerations lead to power loss or malfunction.

It is more likely to cause damage with a computer programmed fuel management device with custom maps if you don't know how to make a custom map or program it on the laptop.

Bike tuning has been made simple and fun.

Nitro X Fuel Commander does not need computer programming and you don't need to have computer or other technical skills to use it.

BENEFITS:

1. Your stock or modified motorcycle will gain more power and torque.

2. All flat spots and fueling issues caused by aftermarket exhausts, air filters and other mods will be eliminated.

3. You save a lot of money as it is a really economical solution for fuel management.

4. Simple programming, easy to remember. Manual is included (English only).

5. 100% safe. No risk involved. You can play with the settings without worrying it can cause damage.

6. Fuel economy. By adjusting the fuel sprayed by the injectors properly to provide for your actual bike needs, the motor functions perfectly saving fuel in everyday conditions.

7. Adjust the bike's performance to your driving style.

INSTALLATION:

1. The product comes with detailed installation instructions (in English only) and there is also support site with detailed installation pages with photos and troubleshooting section. There you can also receive full support for all Nitro X products.

2. You do not need advanced technical knowledge to install the device and very simple skills are involved.

3. The device comes with complete wiring and special flexi-pins or connectors(depending on the model) that plug in the factory connectors. There is no cutting wires or soldering or any other risky procedure involved in the installation.

4. PLUG N' PLAY -The device is activated at the moment it is plugged into the bike's harness. Just select the setting you prefer and you are ready to go.

5. Models/years: depending on the type of connectors and sensors involved a NitroX device might fit many models and years of a specific bike. That's why sometimes you may see on the listing title  more than one models involved or the phrase " All years".

 

PERFORMANCE:

• Nitro X Fuel Commander can increase the horsepower significantly on any injection motorcycle. This Horse Power gain  depends on the engine's capacity and potentials as well as the other parts and performance accessories already installed on a bike.With proper mods the power increase can be up to 15% on some bikes.

• Of course that requires extended modifications and that does not mean that you can get this power increase on your stock bike. The power increase you get is analogical to the power potentials of the engine which increase when you install more performance parts like aftermarket air filters and exhausts, racing parts like camshafts and so on.

• I order to see what kind of power gain to expect on a mildly modified or almost stock bike we have listed below 3 dyno charts.

• We have not used superbikes like CBR,GSXR or ZXR that can easily show higher Dyno results and horsepower gains because of their strong engines but instead we have included bikes that are not meant to produce tons of power when compared to the superbikes that have race origins.

• This is to make clear that there is power improvement on all bikes that use the proper NitroX Fuel Commander. The charts show the difference between the lowest setting and the setting that the bike gained the most power.

The charts  below belong to the following bikes:

1. Yamaha Fazer 1000 2006 model.

Accessories: Nitro X Fuel Commander, Hamaguchi slip-on and DNA high flow air filter, gas flowed head.

Lowest power: 145.69 HP

Max Power: 156.41 HP

2. Kawasaki Z750 2006 model.

Accessories: Nitro X Fuel Commander, Race Tech slip-on and K&N high flow air filter.

Lowest power: 101.26 HP

Max Power: 106.89 HP

3. Yamaha XT660 2007 model.

Accessories: Nitro X Fuel Commander & only DNA high flow air filter stage 2.

Lowest power: 47.31 HP

Max Power: 50.51 HP

12 REASONS TO BUY:

1. Your bike will produce more horsepower throughout the whole powerband and the torque will increase significantly.

2. Performance increase is dyno proved and equivalent in most cases to other expensive fuel management devices but you get it only at a fraction of their price.

3. In some cases bikes already using a different brand fuel management device show an extra power gain of 1-2 HP when combined with the Nitro X Fuel Commander.

4. It is reasonably priced.

5. It eliminates the flat spots and power loss caused by aftermarket air filters and exhaust systems.

6. Easy on course change of programs especially when installed near the handlebars or on petrol tank.

7. It can provide enough fuel to cover the needs of any mod including dry nitrous systems for up to 20 HP power gain.

8. Support site & updated info and troubleshooting page.

9. Easy programming, no need to have ECU programming skills.

10. Does not need a laptop or computer for programming.

11. 100% safe. It cannot cause damage to the engine. Not even long term consequences to the engine's lifespan.

12. Easy to follow installation instructions.

Why low price?

• Because there is no reason for it to be expensive!

• It's an ecu control device without complicated pc reprogramming capabilities or custom remapping options per rpm.It works based on the same principles of ecu signal control as most of the well-known fuel management devices available in the market today but Nitro X fuel commander keeps everything simple.You get the functionality but not the complexity.

• It's safe,simple and honest.The best option for the average rider who does not have ecu software programming and tuning knowledge. The standard 15 available settings cover the needs of everyday riding without risking and experimenting with custom made maps and complicated fuel management devices that in the end might have unsatisfying results and drop in performance if not programmed properly.

RECOMMENDED PRODUCT TO USE WITH   NITRO X  FUEL COMMANDER 
(not included)

Nitro X O2 sensor eliminator

• Eliminates the O2 (lambda) sensor on the exhaust for total fuel control and high performance.

• Low cost mod to be used combined with Nitro X FC or alone.

• A must-have device when you install an aftermarket exhaust or a fuel management device and an ultra-cheap alternative to replace  faulty O2 sensors.