Stock Just Arrived !!!
For ER-6F, ER-6N and VERSYS 650 (2006 models - present)
This
listing is for one Nitro X O2 sensor eliminator for electronic fuel injected
(EFI) motorbikes. (Fits the bike and model specified in the title)
*It will not fit any carb equipped
models
The device
can eliminate the use of the factory O2 sensor located on the exhaust systems
of most fuel injection motorbikes.
* The NitroX O2 sensor eliminator is absolutely
necessary when you install an aftermarket exhaust system or a fuel management
device for better fuel control.
+ Fully compatible with fuel management
devices, ECU flashers and Timing Retard Eliminators or de-restrictors of other
brands like Dynojet, Yoshimura or Nikko.
It does not affect or interfere with their functions.
What is the Nitro X O2 sensor
eliminator?
- Nitro X O2 sensor eliminator is
a simple fuel management control device that can help you get rid of the
restricting function of O2 sensors and unleash your bike's true
potentials.
- When combined with Nitro X Fuel
Commander it helps you select the best performance program for your needs
and also resolve fueling issues that have been caused by aftermarket
exhausts and faulty O2 sensors.
- You can reset back to normal
(factory settings) any time you want by unplugging the device.
- Remember to check if your bike
has one or two lambda sensors.(for 2 sensors there is a different device
available in our shop)
What is an O2/Lambda sensor.
- EFI (Electronic Fuel Injection)
engines use a set of sensors in order to adjust the fueling commands sent
by the ECU.(ECU is the electronic unit that controls the fuel system of
all fuel injected bikes and stores the fueling maps that are responsible
for your bike's performance.)
- Most models use a very powerful
control sensor located on the exhaust system. This sensor known as O2 or
Lambda sensor can be very restricting for your bike's performance as it
connects to the ECU and controls the fuel maps of the bike.
- Most bikes nowadays in order to
meet various manufacturing standards come very restricted from the factory
and by eliminating the O2 sensor the bike unleashes hidden power.
Where is the O2 sensor on my bike?
To find the
O2 sensor on your bike look for the 4 wired metal plug located on the exhaust
pipe usually near the end can (there is a black wire protecting sleeve so it
might look as one wire, just push it back to uncover the wires).
How does Nitro X eliminator work?
The factory
O2 sensor is a standard part for most injection systems so if you decide to
eliminate it the ECU will identify the missing part and trigger an FI warning
light or it will turn to safety program reducing power.
Nitro X
eliminator will fool the ecu and it will safely eliminate the need for the O2
sensor without any side effects.
" IT'S A MUST-HAVE DEVICE, WHEN
YOU REPLACE THE EXHAUST WITH AN AFTERMARKET ONE OR WHEN YOU ARE AFTER BETTER
PERFORMANCE "
It is 100%
safe!-The device works based on the factory standards of the ECU and it cannot
cause any damage to your bike even in the long run.
Bike tuning
has been made simple and fun.
Nitro X
Fuel O2 sensor eliminator does not need computer programming and you don't need
to have computer or other technical skills to use it.
BENEFITS:
- Your stock or modified motorcycle will gain more power
and torque.
- Flat spots and fueling issues caused by aftermarket
exhausts will be eliminated when combined with the Nitro X Fuel Commander.
- You save a lot of money as it is a really economical
solution for fuel management.
- Simple installation. Manual is included (English only).
- 100% safe. No risk involved.
- Fuel economy. It prevents over fueling caused by the
incorrect readings of the Lambda sensor when aftermarket exhausts are
installed.
INSTALLATION:
- The product comes with detailed
installation instructions (in English only) and there is also support site
with detailed installation pages with photos and troubleshooting section. There
you can also receive full support for all Nitro X products.
- You do not need advanced
technical knowledge to install the device and very simple skills are
involved.
- The device comes with complete
wiring and special flexi-pins or connectors (depending on the model) that
plug in the factory connectors. There is no cutting wire or soldering or
any other risky procedure involved in the installation.
- PLUG N' PLAY -The device is
activated at the moment it is plugged into the bike's harness. Just plug
it in and you are ready to go.
- Models/years: depending on the
type of connectors and sensors involved a NitroX device might fit many
models and years of a specific bike. That's why sometimes you may see on
the listing title more than one models involved or the phrase "All
years".
10 REASONS TO BUY:
- Your bike can produce more horsepower throughout the
whole power band and the torque will increase significantly, especially if
combined with the NitroX Fuel Commander or another fuel management device.
- It eliminates the flat spots and power loss caused by
the O2 sensors when you install aftermarket exhaust systems or end cans.
- Absolutely necessary when you install a fuel control
device as most fuel management devices require an O2 sensor eliminator for
better fuel control.
- It is reasonably priced.
- Does not need a laptop or computer for programming.
- Easy installation and detailed instructions in
english(only).
- Support site & updated info, plus troubleshooting
page.
- 100% safe. It cannot cause damage to the engine. Not
even long term consequences to the engine's lifespan.
Why low price?
- Because there is no reason for
it to be expensive!
- It's safe, simple and honest. The
best option for the average rider who does not have ecu software
programming and tuning knowledge. Why pay more when you get the same
results for less?
RECOMMENDED PRODUCT TO USE WITH NITRO X O2 SENSOR ELIMINATOR
(not included)
Nitro X Fuel Commander
- Re-adjusts the fuel-air ratio
for total fuel control and high performance.
- High performance mod to be used
combined with Nitro X O2 sensor eliminator or alone.
