Stock Just Arrived..!!!
For ER-6n, ER-6f and Versys 650 models from '06 - present
This listing is for one programmable ECU
remapping unit for electronic fuel injected (EFI) motorbikes. (Fits the
bike and model specified in the title)
*It will not fit any carb equipped
models
The device
can activate 15 different ECU maps which include fuel economy and power
increase options.(ECU is the electronic unit that controls the fuel system of
all fuel injected bikes and stores the fueling maps that are responsible for
your bike's performance.)
+ Fully compatible with other fuel management
devices, ECU flashers and Timing Retard Eliminators or de-restrictors of other
brands like Dynojet, Yoshimura or Nikko.It does not affect or interfere with
their functions.
What is the Nitro X Fuel Commander?
Nitro X is
a simple fuel management control system that can help you select the best
performance program for your needs and also resolve fueling issues that have
been caused by aftermarket exhausts and racing air filters.
You can
reset back to normal (factory settings) any time you want.
" IT'S A UNIQUE DEVICE, A MUST
HAVE FOR YOUR BIKE TUNING THAT OFFERS YOU THE HORSEPOWER GAIN OF AN EXPENSIVE
RACING ECU UNIT OR A FUEL MANAGEMENT DEVICE !"
HOW IT WORKS:
The device
can manipulate the ECU by controlling some sensors of the bike and force it to
change fueling maps. This way it can activate 15 different fueling maps that
can provide for the fuel needs of most common mods like racing exhausts or high
flow air filters or even for more uncommon mods like dry nitrous oxide systems
for up to 20 HP gain.
Activation
of the different maps is achieved by turning on/off the buttons on the control
panel of the device.
It is 100%
safe!-The device works based on the factory standards of the ECU and it cannot
cause any damage to your bike even in the long run.
It does not
lean or over fuel the motorcycle in order to gain power. This is a common
misconception but it is very unreasonable to believe that as both of the above
situations cause loss in power and problematic function of the engine. In order
to achieve power gain you need to adjust the fuel properly any exaggerations
lead to power loss or malfunction.
It is more
likely to cause damage with a computer programmed fuel management device with
custom maps if you don't know how to make a custom map or program it on the
laptop.
Bike tuning
has been made simple and fun.
Nitro X
Fuel Commander does not need computer programming and you don't need to have
computer or other technical skills to use it.
BENEFITS:
- Your stock or modified motorcycle will gain more power
and torque.
- All flat spots and fueling issues caused by aftermarket
exhausts, air filters and other mods will be eliminated.
- You save a lot of money as it is a really economical
solution for fuel management.
- Simple programming, easy to remember. Manual is
included (English only).
- 100% safe. No risk involved. You can play with the
settings without worrying it can cause damage.
- Fuel economy. By adjusting the fuel sprayed by the
injectors properly to provide for your actual bike needs, the motor
functions perfectly saving fuel in everyday conditions.
- Adjust the bike's performance to your driving style.
INSTALLATION:
- The product comes with detailed
installation instructions (in English only) and there is also support site
with detailed installation pages with photos and troubleshooting section. There
you can also receive full support for all Nitro X products.
- You do not need advanced
technical knowledge to install the device and very simple skills are
involved.
- The device comes with complete
wiring and special flexi-pins or connectors(depending on the model) that
plug in the factory connectors. There is no cutting wires or soldering or
any other risky procedure involved in the installation.
- PLUG N' PLAY -The device is
activated at the moment it is plugged into the bike's harness. Just select
the setting you prefer and you are ready to go.
- Models/years: depending on the
type of connectors and sensors involved a NitroX device might fit many
models and years of a specific bike. That's why sometimes you may see on
the listing title more than one
models involved or the phrase " All years".
PERFORMANCE:
- Nitro X Fuel Commander can
increase the horsepower significantly on any injection motorcycle. This
Horse Power gain depends on the
engine's capacity and potentials as well as the other parts and
performance accessories already installed on a bike.With proper mods the
power increase can be up to 15% on some bikes.
- Of course that requires
extended modifications and that does not mean that you can get this power
increase on your stock bike. The power increase you get is analogical to
the power potentials of the engine which increase when you install more
performance parts like aftermarket air filters and exhausts, racing parts
like camshafts and so on.
- I order to see what kind of
power gain to expect on a mildly modified or almost stock bike we have
listed below 3 dyno charts.
- We have not used superbikes
like CBR,GSXR or ZXR that can easily show higher Dyno results and horsepower
gains because of their strong engines but instead we have included bikes
that are not meant to produce tons of power when compared to the
superbikes that have race origins.
- This is to make clear that
there is power improvement on all bikes that use the proper NitroX Fuel
Commander. The charts show the difference between the lowest setting and
the setting that the bike gained the most power.
The
charts below belong to the following
bikes:
1. Yamaha Fazer 1000 2006 model.
Accessories:
Nitro X Fuel Commander, Hamaguchi slip-on and DNA high flow air filter, gas
flowed head.
Lowest
power: 145.69 HP
Max Power:
156.41 HP
2. Kawasaki Z750 2006 model.
Accessories:
Nitro X Fuel Commander, Race Tech slip-on and K&N high flow air filter.
Lowest
power: 101.26 HP
Max Power:
106.89 HP
3. Yamaha XT660 2007 model.
Accessories:
Nitro X Fuel Commander & only DNA high flow air filter stage 2.
Lowest
power: 47.31 HP
Max Power:
50.51 HP
12 REASONS TO BUY:
- Your bike will produce more horsepower
throughout the whole powerband and the torque will increase significantly.
- Performance increase is dyno proved
and equivalent in most cases to other expensive fuel management devices
but you get it only at a fraction of their price.
- In some cases bikes already
using a different brand fuel management device show an extra power gain of
1-2 HP when combined with the Nitro X Fuel Commander.
- It is reasonably priced.
- It eliminates the flat spots
and power loss caused by aftermarket air filters and exhaust systems.
- Easy on course change of
programs especially when installed near the handlebars or on petrol tank.
- It can provide enough fuel to
cover the needs of any mod including dry nitrous systems for up to 20 HP
power gain.
- Support site & updated info
and troubleshooting page.
- Easy programming, no need to
have ECU programming skills.
- Does not need a laptop or
computer for programming.
- 100% safe. It cannot cause
damage to the engine. Not even long term consequences to the engine's
lifespan.
- Easy to follow installation
instructions.
Why low price?
- Because there is no reason for
it to be expensive!
- It's an ecu control device
without complicated pc reprogramming capabilities or custom remapping
options per rpm.It works based on the same principles of ecu signal
control as most of the well-known fuel management devices available in the
market today but Nitro X fuel commander keeps everything simple.You get
the functionality but not the complexity.
- It's safe,simple and honest.The
best option for the average rider who does not have ecu software
programming and tuning knowledge. The standard 15 available settings cover
the needs of everyday riding without risking and experimenting with custom
made maps and complicated fuel management devices that in the end might
have unsatisfying results and drop in performance if not programmed
properly.
RECOMMENDED PRODUCT TO USE WITH NITRO X FUEL COMMANDER
(not included)
Nitro X O2 sensor eliminator
- Eliminates the O2 (lambda)
sensor on the exhaust for total fuel control and high performance.
- Low cost mod to be used
combined with Nitro X FC or alone.
- A must-have device when you
install an aftermarket exhaust or a fuel management device and an
ultra-cheap alternative to replace
faulty O2 sensors.
